Басты бет - Consumer Goods & Electronics - Electronics, computers and office - Computer components - Cases - Zalman - Computer case Z10 without PSU, black

Zalman Computer case Z10 without PSU, black

өнім коды: Z10

Сипаттама Пайдалы

Алдыңғы

Келесі

Жүктеп алу

Техникалық сипаттама Zalman Computer case Z10 without PSU, black:

Негізгі параметрлер

Параметрлердің толық тізімі

Category	game
Case type	Mid Tower
Motherboard type	E-ATX
	ATX
	mini-ITX
	micro-ATX
Internal compartments 3.5"	2 pcs (1x Cage Combo, 1 x Guide Toolless)
Power complete PSU	without PSU
Installed fans	4 pcs (3 x 140мм - спереди; 1 x 120 мм - сзади)
Colour	black

Main

Category	game
Case type	Mid Tower
Motherboard type	E-ATX
	ATX
	mini-ITX
	micro-ATX

Inner part

Internal compartments 2.5"	2
Internal compartments 3.5"	2 pcs (1x Cage Combo, 1 x Guide Toolless)
Holes for expansion slots	7 pcs
Power complete PSU	without PSU

Power supply unit

Cooling	Back panel: 1x 120mm
	3 x 140 mm on the front panel
	3 x 120 mm at the front
	верхняя панель: 3 x 120мм / 2x140мм
	боковая панель 2 x 120 мм
	нижняя панель 2 x 120 мм
	верхние радиаторы 120 мм/ 140 мм/ 240 мм/ 280 мм/ 360 мм
	передние радиаторы 120 мм/ 140 мм/ 240 мм/ 280 мм/ 360 мм
	задний радиатор 120 мм

Cooling and airflow

Installed fans

4 pcs (3 x 140мм - спереди; 1 x 120 мм - сзади)

Connectors on the front panel

USB 3.0 connectors	2 pcs
Audio (microphone / headphone )

Physical

Material	steel
	plastic
	hardened glass /(боковая панель)
Colour	black
The weight	8 kg
Height	488 mm
Width	220 mm
Depth	481 mm
Height of CPU cooler (max.)	173 mm
Max. power supply length	200 mm
Maximum length of VGA	395 mm

Орау параметрлері

Ені	330 мм
Биіктігі	560 мм
Ұзындық	580 мм
Салмақ	9.70 кг
Көлемі	0.1072 м3

Кепілдік

12 ай

Destination: game; Enclosure type: Mid Tower; Form factor: E-ATX, ATX, mini-ITX, micro-ATX; Case color: black; Internal compartments 3,5": 2 pcs; Power complete PSU: without PSU;

46490 тенге*

күтілуде

* Ұсынылатын бөлшек сауда бағасы

Сипаттамасы Zalman Computer case Z10 without PSU, black

Materials: The case is made of durable 0.7mm steel with black coating. There are no sharp or unpolished edges in the body, which is important for DIY or industrial assembly. The front panel is mesh for active ventilation. Side panel made of 4 mm tempered glass, fixed without screws. The panel is not difficult to dismantle and install.

Optimized Cooling:

Includes 4 pieces. fans: 3 pcs x 140mm on the front panel and 1 pcs x 120mm on the rear panel. In general, the case has enough seats for eleven fans and a processor cooler up to 173mm in height.

You can also install one (120) or two (240) or three (360) section liquid cooling on the front and top panels, and one (120) section on the rear panel.

Availability of dust filters

The set includes four dust filters - on the front, top, bottom and right side panels. Convenient access The power management button, reboot, audio ports, USB 3.0 and USB Type C are located on the top panel. Modern USB 3.0 and USB Type C connectors provide data transfer up to 10 times faster than USB 2.0

Design Features:

3.5" compartments available: 2 (1x Cage Combo, 1 x Guide Toolless) (installation does not require the use of tools - screwless fastening) and 2 x 2.5" for installing SSD;
7 expansion slots;
Large Mid Tower format for E-ATX / ATX / mATX / Mini-ITX platforms;
you can place an ATX power supply up to 200mm long, a processor cooling up to 173mm high, a video adapter up to 395mm long;
the legs are rubberized, the body is stable and does not vibrate; smart cable management (the distance from the side panel for cable management is 2 cm) – special rubberized holes are provided for neat cable routing;
Additionally, the kit includes a holder for a video card with the ability to adjust its height;
perforation on the side panel for active ventilation and removal of warm air from system components.